The Advantages of Polyurethane Screen

Home/Products/Custom mould Polyurethane parts

The Advantages of Polyurethane Screen

Categories: Custom mould Polyurethane parts

Application: The Advantages of Polyurethane Screen

Inquiry

Main description:

The Advantages of Polyurethane Screen

DESCRIPTION


What are the advantages of polyurethane screen compared with ordinary metal screen?


1. Longer service life

 

Polyurethane mesh has a longer service life than ordinary metal mesh. Due to the use of steel wire rope as the skeleton material of polyurethane screens, coupled with the high tensile strength and bearing capacity of polyurethane itself, the service life of polyurethane screens is several times that of ordinary metal screens.

 

2. The screening efficiency is high

 

Polyurethane has strong water permeability and large sieve hole cone angle (140°), so it can effectively prevent the adhesion of wet fine-grained materials. Due to the special welding process of the screen itself and the structure of the screen, the entire screen surface is full of elasticity and relaxation performance, and the opening rate of the screen is extremely high, which can effectively avoid hole blocking under dynamic conditions.

 

3. The scope of application is wide, and the professional applicability is stronger

Polyurethane screen itself has good self-cleaning performance, whether it is dry screening or wet screening, it can perform efficient screening.

 

4. Low working noise and high economic benefit

 

When screening materials, according to experiments, under the same conditions, the noise generated by polyurethane screen equipment is far lower than that of equipment using ordinary metal mesh. At the same time, it can greatly reduce the large amount of dust generated by the equipment during the screening process. In addition, the use of polyurethane screens can also effectively reduce the overall cost of investment and improve economic benefits.


569EC0C58807AEB3AFE28BD54973F2CE.jpg

6384cadc6dadc44842f8331db6d6f208.jpg





Rubber Mold           Plastic Mold           Cold Isostatic Pressing Bags         CIP bags

0.258234s